CHAMATTI GLAZES | Giovanni Cimatti
€350.00
10-11 April 2027
The clay granules that emerge from the glazed coatings
Giovanni Cimatti presents one of his innovations.
The clay granules peeking through the glazed coatings create a captivating textural effect.
The surfaces take on a rocky appearance and convey a different story, far removed from the tradition of glasswork. During the course, participants will learn how to produce special coloured granules, which will be applied to flat, irregularly shaped surfaces that have already been bisque-fired, and subsequently coated with coloured crystalline glazes.
Giovanni Cimatti
Giovanni Cimatti was a teacher at the Art Institute in Siena, director of the ‘T. Minardi’ School of Drawing and Plastic Art in Faenza and teacher at the State Art Institute for Ceramics in Faenza. He began his artistic activity in the 1970s, developing a personal research on the relationship between form and surface by reworking various techniques such as sangam clay decorations, raku, decalcomania, and terra sigillata, and for years he has also been interested in high temperature. He has been invited to important international ceramic art exhibitions, has held solo exhibitions by invitation in Belgium, Japan, Holland, Korea and Switzerland and has participated in cultural exchanges in France, Japan and Germany. He has had solo exhibitions: at the Museum of Contemporary Art at Kyungshung University in Pusan, Korea, at the Ceratekno Gallery in Toki City, Japan, and at the Museo Civico Archeologico in Bergamo.
The 14-hour course starts at 9 a.m. and ends at 5 p.m. on Saturday and starts at 9 a.m. and ends at 4 p.m. on Sunday.
Included in the course:
14 hours of teaching | the materials needed for the course | the firings | 2 breakfasts | a gift box (with samples of the materials used during the course)
Teacher: Giovanni Cimatti
Download the programme in pdf format
To confirm your purchase, you must pay the deposit or the full amount by following the procedure below.
Related products
CERAMIC MAZE: THE GLAZES | Vilma Bosi
Learn how to work with glazes, easy application, decoration and firing of ceramics.
How much water should be added when preparing the glaze? How should you proceed to make a good application? In this course we want to introduce you to glazing ceramic artefacts by providing some basic specific skills. We will start with the knowledge of the products (Glazes, Transparent glazes, Colours, etc.) and their peculiarities, we will begin with how to proceed in their preparation and we will end with the opportunity to try out the main glazing techniques and a guide to ceramic firing. In particular, we will deal with application by immersion, spraying with an airbrush and brush glazing with the aid of special vehicles that allow for better application. We will present the necessary steps to obtain effects in the coatings also with applications in several layers that will be made on clay supports, already fired, provided by the organisation.
Vilma Bosi
In 1978 she began his work as a ceramist in Antonietta Mazzotti's workshop where he became passionate and specialised in the decoration of ceramic artefacts. During her career, she collaborated with the Diva ceramics industry where she was in charge of the hand-decorated department and laboratory. Over time, her specialisation became the third fire (mainly gold and precious) thanks to which she collaborated with various artists and craftsmen in Italy. Among the most important are: La bottega Gatti, Fos Ceramiche, Padovani Ceramiche, Laboratorio Pesaro, Coralla Maiuri and Ceramic & Colours. In 2011, she was hired by Ceramic & Colours as laboratory manager, a role she still holds today. Since 2018 she has been teaching at the Faenza Art Ceramic Center.
The 17-hour course starts at 9 a.m. and ends at 5 p.m. on Saturdays and Sundays and starts at 9 a.m. and ends at noon on Mondays.
Included in the course:
17 hours of teaching | materials needed for the course | firings | 3 breakfast | gift box (with samples of the materials used during the course)
Teacher: Vilma Bosi
Language: Italian
Download the full program in pdf
To confirm your inscription you have to make a bank transfer of a deposit or the total amount.
PATTERN AND TRANSPARENCY | Guy Van Leemput
Course on very thin and transparent porcelain.
This workshop is an introduction to making wafer-thin bowls with flax reïnforced porcelain on an inflated balloon, as well as discovering how to make a shrinking support on which the wafer-thin bowl can be hung upside down in the kiln. The first day you will start by getting to know this wonderful clay. Guy Van Leemput will teach techniques for applying patterns with the opportunity to practice yourself. Each participant will start a bowl with one of the demonstrated techniques. We will also make the swinging supports that will carry the piece in the kiln. After this first ‘maiden-bowl’ is finished you will be challenged to push your limits further with a second bowl on day 2. New 'advanced' techniques will be shown, for which we will use a mini clay press. The bowls made will be fired on the spot and can be taken home on day 3.
The lessons are totally practical in addition to a theoretical chapter, firing and materials and a DPF (Frequently Asked Questions) session.
Guy Van Leemput
Guy Van Leemput (1967, Herentals, Belgium) studied mathematics and ceramics. He has been invited several times for an artist-in-residence at the Sanbao Ceramic Art Institute, Jingdezhen, China. His work has been selected for competitions and group exhibitions in his own country and in other European countries, as well as in Japan, China and Australia. At the MINO International Ceramics Competition 2014, his work “Big Anas” won the Bronze Award, it is now in the collection of the Museum of Modern Ceramic Art, Gifu, Japan. Guy was chosen as one of the Ceramics Monthly Emerging Artists 2020. In 2021 he was ‘recommended’ by the Michelangelo Foundation as ‘Master Artisan’. In 2022 he was a key speaker at ‘The Ceramics Congress, Australia’.
The 20-hour workshop lasts from 9.00 to 17.00 on Friday and Saturday and from 9.00 to 16.00 on Sunday.
Included in the Workshop cost:
20 hours of teaching | all the necessary materials | firings | nr. 3 breakfasts
Teacher: Guy Van Leemput
Languages: English, Italian
Download the full program in pdf
To confirm your inscription you have to make a bank transfer of a deposit or the total amount.
THE BASES OF PLASTER MOULDS | Marco Malavolti
This course will cover plaster moulding
Reproducing a shape for large or small productions, but also creating unique objects from a casting or pressure mould, simplifying the working processes; this is the dream of many ceramists.
The teacher Marco Malavolti will present in an effective, simple and creative way an intensive programme on the basic techniques needed to make multi-part moulds for casting and pressure moulding.
Participants will work on objects provided by the organisation on which the moulds will be made. The objects are designed to see different complexities and moulding techniques.
Marco Malavolti
After graduating at Ballardini in Faenza, he started working in 1997 as a craftsman and immediately started collaborating with the International Museum of Ceramics, producing several works. At the same time, he also collaborated with Elena Agnini in Munich where he specialised in restoration. Also in 1997, he began teaching at the "T. Minardi" School where he held courses in basic and advanced ceramics. Over the next five years he specialised in moulding, becoming a reference point in Italy on this subject.
In 2002, he opened Manifatture Sottosasso, structuring various activities: his own production linked to the world of design, collaborations with artists and galleries (the most important include: Garutti Alberto, Siedlecki Namsal, Previti Riccardo, Simeti Francesco, Ornaghi e Prestinari, Galleria Minini, Galleria Zero, Galleria Continua, Fondazione Officine Saffi, Galleria Nilufar). Also, production for companies and collaborations with museums where he mainly works on moulding (among the most important museums are: Museo Internazionale delle Ceramiche in Faenza, Museo di San Domenico and Museo Gypsotheca Antonio Canova and Museo Carlo Zauli).
The 20-hour workshop lasts from 9.00 to 17.00 on Saturday and Sunday and from 9.00 to 16.00 on Monday.
Included in the Workshop cost:
20 hours of teaching | all the necessary materials | perfectly equipped studio | no. 3 breakfast
Teacher: Marco Malavolti
Language: Italian, English
Download the full program in pdf
To confirm your inscription you have to make a bank transfer of a deposit or the total amount.
THE SHAPES OF PORCELAIN | Etra Masi
Multi-technical course on Liquid and body porcelain.
Porcelain is a material with many qualities: transparency, whiteness, hardness; to enhance them is to have understood its nature. In this course, different techniques will be addressed, the first step towards being able to move freely within the production processes of porcelain.
Casting, plastic modelling, moulding and glazing are the bases from which both objects of use and sculptural masses can be created. Porcelain in liquid form and in the plastic state will be worked with or without the aid of plaster moulds into small shapes, analysing for each phase: time, criticality and potential.
Each participant, at the end of the course, will have broadened and clarified his or her knowledge of the physical and technical properties of 'white gold' and will be able to choose the working method most suited to his or her imagination.
Etra Masi
He graduated in Sculpture from the Academy of Fine Arts in Naples, where he expanded on the theme of "contaminations" and investigated the relationship between sculpture and architecture. When he arrived in Faenza in 2015, he came into contact with the ceramic tradition, deepening his knowledge of craft techniques. Porcelain becomes his material of choice, he builds his sculptures by modelling them by hand, everything revolves around the enhancement of the tactile dimension, the gesture writes the sign.
Her work is featured at trade fairs, exhibitions and international art competitions. In 2021 she is selected for The Blanc de Chine International Ceramic Art Award in Hangzhou Winland Center, China; in 2019 she receives an Honourable Mention for the International Biennial of Ceramic Art of Aveiro, Portugal.
The 20-hour workshop lasts from 9.00 to 17.00 on Saturday and Sunday and from 9.00 to 16.00 on Monday.
Included in the Workshop cost:
20 hours of teaching | all the necessary materials | firings | nr. 3 breakfasts | a box with the samples of the materials used during the workshop
Teacher: Etra Masi
Languages: Italian
Download the full program in pdf
To confirm your inscription you have to make a bank transfer of a deposit or the total amount.
LEARNING HOW TO USE GLOOP GLAZE | Jihyun Kim
Course on Handbuilding and Gloop glaze.
Throughout the masterclass, participants will learn a variety of techniques for working with Gloop glaze, from understanding how it behaves on different forms to using it as a creative tool for texture, movement, and surface expression. Participants will learn how to mix the glaze and how to prepare it for firing. Participants will create three-dimensional sculptural pieces, allowing them to experiment with different applications and effects.
Jihyun Kim
Jihyun Kim (b. 1997, South Korea) is an award-winning ceramic designer based in London. She holds an MA in Ceramics and Glass from the Royal College of Art. Internationally recognized, her work has been exhibited at Collect, Milan Design Week, the British Ceramic Biennial, and Officine Saffi. She received the Collect Open Bursary and won the Rosalind Stracey Ceramic Award from Cockpit Arts.
The 20-hour workshop lasts from 9.00 to 17.00 on Saturday and Sunday and from 9.00 to 16.00 on Monday.
Included in the Workshop cost:
20 hours of teaching | all the necessary materials | firings | nr. 3 breakfasts
Teacher: Jihyun Kim
Languages: English, Italian
Download the full program in pdf
To confirm your inscription you have to make a bank transfer of a deposit or the total amount.
DECORATION WITH GOLD, LUSTRES AND COLOURS | Vilma Bosi
Learn how to work with precious and third-fire colours, easy application, decoration and firing of ceramics.
Third-firing decoration with gold, lustres and colours is a fascinating art that if well managed can be much less expensive than expected. Course participants will learn a correct approach to the technique so as not to waste time and resources. The course will begin with the knowledge of precious metals (gold and lustres) and their peculiarities, and will then move on to the preparation of the objects to be decorated, up to their application through personal decoration exercises. The course will continue with third-firing colours, and the various steps necessary to personalise already glazed objects with decorations (fillets, lettering, etc.) and backgrounds will be explored.
Vilma Bosi
In 1978 she began his work as a ceramist in Antonietta Mazzotti's workshop where he became passionate and specialised in the decoration of ceramic artefacts. During her career, she collaborated with the Diva ceramics industry where she was in charge of the hand-decorated department and laboratory. Over time, her specialisation became the third fire (mainly gold and precious) thanks to which she collaborated with various artists and craftsmen in Italy. Among the most important are: La bottega Gatti, Fos Ceramiche, Padovani Ceramiche, Laboratorio Pesaro, Coralla Maiuri and Ceramic & Colours. In 2011, she was hired by Ceramic & Colours as laboratory manager, a role she still holds today. Since 2018 she has been teaching at the Faenza Art Ceramic Center.
The 11-hour course starts at 9 a.m. and ends at 5 p.m. on Saturday and starts at 9 a.m. and ends at 1 p.m. on Sunday.
Included in the course:
11 hours of teaching | the materials needed for the course | the firings | nr. 2 breakfasts
Teacher: Vilma Bosi
Language: Italian
Download the full program in pdf
To confirm your inscription you have to make a bank transfer of a deposit or the total amount.
SWEET RAKU WITH LUSTRES | Giovanni Cimatti
Sweet Raku is an idea that Giovanni Cimatti came up with in the late 1990s and which differs from so-called Raku in that it has reduced fumigation and the use of chamotte-free clays.
Giovanni Cimatti's sweet raku in some of its declinations.
During the course, forms will be made that simultaneously and in a single firing will have the orange colour of 'sealed earths', the transparencies of copper and non-copper crystallines, the lustres in copper reduction in gas kiln firing and the black of Raku smoke.
Giovanni Cimatti
Giovanni Cimatti was a teacher at the Art Institute in Siena, director of the 'T. Minardi' School of Drawing and Plastic Art in Faenza and teacher at the State Art Institute for Ceramics in Faenza. He began his artistic activity in the 1970s, developing a personal research on the relationship between form and surface by reworking various techniques such as sangam clay decorations, raku, decalcomania, and terra sigillata, and for years he has also been interested in high temperature. He has been invited to important international ceramic art exhibitions, has held solo exhibitions by invitation in Belgium, Japan, Holland, Korea and Switzerland and has participated in cultural exchanges in France, Japan and Germany. He has had solo exhibitions: at the Museum of Contemporary Art at Kyungshung University in Pusan, Korea, at the Ceratekno Gallery in Toki City, Japan, and at the Museo Civico Archeologico in Bergamo.
The 14-hour course starts at 9 a.m. and ends at 5 p.m. on Saturday and starts at 9 a.m. and ends at 4 p.m. on Sunday.
Included in the course:
14 hours of teaching | materials needed for the course | firings | 2 breakfasts | gift box (with samples of the materials used during the course)
Teacher: Giovanni Cimatti
Language: Italian
Download the programme in pdf format
To confirm your purchase, you must pay the deposit or the full amount by following the procedure below.
THE BASIS OF CUERDA SECA | Riccardo Torri
Learn how to work with the Cuerda Seca technique.
Are you tired of searching for fragmented and unreliable information on cuerda seca?
Do you want to achieve satisfactory results from your very first attempts without wasting time, resources and energy experimenting blindly? Well, this course is specifically designed to give you all the information you need to perform the cuerda seca technique smoothly and without any nasty surprises during firing.
We will begin by explaining the principle of the technique, what the black cuerda compound is, how it is prepared and applied, which are the best brushes to use, the movements and the correct posture for working. We will talk about glazes and how to prepare and apply them correctly to biscuits, both horizontally and vertically. We will see together how to create shades to achieve a realistic effect and we will also talk about the famous “transparent cuerda” variant.
The 17-hour course starts at 9 a.m. and ends at 5 p.m. on Saturday and starts at 9 a.m. and ends at 4-5 p.m. on Sunday.
Included in the course:
17 hours of teaching | the materials needed for the course | the firings | 3 breakfast
Teacher: Riccardo Torri
Language: Italian
Download the full program in pdf
To confirm your inscription you have to make a bank transfer of a deposit or the total amount.
